Bioesque Mold Resistant Coating White
Zoom image

Bioesque Mold Resistant Coating White

Description:
Bioesque® Mold-Resistant Coating is a water-based protective coating that
can be used to paint over existing mold, mildew, fungi, and odor-causing
bacteria and cover the associated stains. The Mold-Resistant Coating
contains a matrix of EPA-registered fungicides to resist and prevent the growth
of mold and mildew on dry-coated surfaces, while providing maximum
durability and flexibility on all substrates.
Mold-Resistant Coating is a primer, sealer and stain-blocker (white only) for
use on non-porous interior and exterior applications in residential, commercial
and industrial settings.

Features & Benefits:
• Contains a Matrix of EPA-Registered
Fungicides
• Resists Mold Growth on
Dry-Coated Surfaces
• Provides Long-Term Protection
• Durable, Flexible and Permeable 100%
Acrylic, Water-Based Coating
• Tintable Formula Works on Interior
and Exterior Surfaces
• Designed to Provide the Most
Protection and Durability to All Surfaces
Post Remediation, as Well as a
Preventative Treatment for Areas Prone
to Fungal Growth
• Provides a Breathable Barrier Which
Allows Moisture to Evaporate While
Blocking Mold-Supporting Nutrients
from Migrating to the Surface for Added
Protection Against Future Mold Growth
• Prevents Stains from Mold, Mildew,
Grease, Rust, Creosote and Tannins
from Migrating Through the Primer Film
to the Surface
• EPA-Registered Fungicides at 3x
the Levels of the Competition
• Bonds to Glossy Surfaces
without Scuffing
• Fast-Drying Formula Allows for
Top Coat After One Hour
• Low VOC/Low Odor
• Easy Soap and Water Cleanup

 

Directions for Use:


Surface Preparation:
Surfaces to be coated must be free of dust, mildew, mold, dirt, grease, loose
paint, oil, glue, calcimine, wax, soap and other surface contamination. Clean
mold-stained surfaces with Bioesque Botanical Disinfectant Solution or
Bioesque Botanical Surface Cleaner and Sealant. Patch irregularities with vinyl
patching paste or an appropriate patching compound. Bioesque
Mold-Resistant Coating is self-priming over bare sheetrock, composition
board, ceiling tile and concrete. Recommended for use on wood, plaster,
wallboard, sheetrock, concrete, masonry block, primed metal and galvanized
metal. Bioesque Mold-Resistant Coating may also be used on new structural
materials during building construction.
DRYWALL - Joint cement should be sanded smooth but avoid abrading the
paper.
Tinting: Up to 2 oz of pigment per gallon – white only
Thinning: If thinning is required, add a maximum of 8 oz of water per gallon
of coating.
Coverages:
Smooth Surfaces: 350-600 ft2
/gal
Porous Surfaces: 250-300 ft2
/gal

  • $215.00
Qty:  
In stock (50 items available)
Add a different product to compare

Description:
Bioesque® Mold-Resistant Coating is a water-based protective coating that
can be used to paint over existing mold, mildew, fungi, and odor-causing
bacteria and cover the associated stains. The Mold-Resistant Coating
contains a matrix of EPA-registered fungicides to resist and prevent the growth
of mold and mildew on dry-coated surfaces, while providing maximum
durability and flexibility on all substrates.
Mold-Resistant Coating is a primer, sealer and stain-blocker (white only) for
use on non-porous interior and exterior applications in residential, commercial
and industrial settings.

Features & Benefits:
• Contains a Matrix of EPA-Registered
Fungicides
• Resists Mold Growth on
Dry-Coated Surfaces
• Provides Long-Term Protection
• Durable, Flexible and Permeable 100%
Acrylic, Water-Based Coating
• Tintable Formula Works on Interior
and Exterior Surfaces
• Designed to Provide the Most
Protection and Durability to All Surfaces
Post Remediation, as Well as a
Preventative Treatment for Areas Prone
to Fungal Growth
• Provides a Breathable Barrier Which
Allows Moisture to Evaporate While
Blocking Mold-Supporting Nutrients
from Migrating to the Surface for Added
Protection Against Future Mold Growth
• Prevents Stains from Mold, Mildew,
Grease, Rust, Creosote and Tannins
from Migrating Through the Primer Film
to the Surface
• EPA-Registered Fungicides at 3x
the Levels of the Competition
• Bonds to Glossy Surfaces
without Scuffing
• Fast-Drying Formula Allows for
Top Coat After One Hour
• Low VOC/Low Odor
• Easy Soap and Water Cleanup

Directions for Use:


Surface Preparation:
Surfaces to be coated must be free of dust, mildew, mold, dirt, grease, loose
paint, oil, glue, calcimine, wax, soap and other surface contamination. Clean
mold-stained surfaces with Bioesque Botanical Disinfectant Solution or
Bioesque Botanical Surface Cleaner and Sealant. Patch irregularities with vinyl
patching paste or an appropriate patching compound. Bioesque
Mold-Resistant Coating is self-priming over bare sheetrock, composition
board, ceiling tile and concrete. Recommended for use on wood, plaster,
wallboard, sheetrock, concrete, masonry block, primed metal and galvanized
metal. Bioesque Mold-Resistant Coating may also be used on new structural
materials during building construction.
DRYWALL - Joint cement should be sanded smooth but avoid abrading the
paper.
Tinting: Up to 2 oz of pigment per gallon – white only
Thinning: If thinning is required, add a maximum of 8 oz of water per gallon
of coating.
Coverages:
Smooth Surfaces: 350-600 ft2
/gal
Porous Surfaces: 250-300 ft2
/gal

    • Weight
      45.0000 lbs
    • SKU
      10000049512-clone-1